Bypass door’s Safety contacts
Turn BYPASS Selector to the required position:
a) With any BYPASS the RED light will switch ON.
b) Controller gives the Bypass fault.
c) Movement of lift will be possible only in Inspection or from PME.
PRE-LOCK = Preliminary contacts (Manual floor doors)
LOCK = Floor door Locks
CAR = Car door contacts
Single Brake Test
1 – Press BRAKE button
2 – Turn BRAKE key on position 1 to open First Brake or on 2 to open Brake.
Test can be made only:
a) With cabin stationary and doors closed;
b) During test 3 and test 4 (measurement of stopping distance at nominal speed)
c) During deceleration and standard stop (to check Contactor locked fault)
To Next Page
Loading...