– Extra limit switches
– Inspection limit switches
– Overspeed Governor (combined with an electronic safety gear
– Door bypass circuit (movement with doors open)
– UCM (in case of certified double brake)
• EU approved, SIL3 (TÜV)
Magnetic Tape
Remove all the magnets in the compartment before installing the magnetic tape.
Do not install the magnetic tape near permanent magnet motors.
Do not use magnetized tools near the Magnetic tape.
Do not use welding equipment near the magnetic tape.
Respect the fitting shown on the tape and make sure it is in the correct position shown in the following figure:
To Next Page
Loading...