Chapter 3 21
Touch on Capture to select the mode in
which values will be stored in the Datalogger.
Figure 3.11: Memory capture modes menu
The QS3 has the following capture modes:
Manual: Touch the key to store values.
Auto: When the transducer is coupled measurements are continuously
stored.
Free memory is followed by a number representing the remaining
memory that is available to store data and is represented in number of
cells.
Touch on Free to view the remaining number of free cells and the
free memory space as a percentage of the unit total memory.
Figura 3.12: Remaining memory screens
To Next Page
Loading...