C-6000i Computerized Jigging Reel User Manual
27
SEARCH ALL
In this search system the search span is from the bottom to the surface. If a
false bottom is set at some depth it will search from that depth up to the
surface.
BOTTOM SEARCH1
The search span is from the bottom and half-way to the surface. A false
bottom can be set to change the bottom of the search span.
BOTTOM SEARCH2
Same as above but the search span is from bottom and 25% of the way up to
the surface.
SURFACE SEARHC1
This system is just like the first search system with a false bottom at a depth
of 8 times the jigging length. It automatically sets the false bottom at this
depth and then searches from there up to the surface. If the depth at bottom
is less than 8 times the jigging length the false bottom will be set at that depth
and each time the sinker hits the bottom the false bottom will be set
accordingly.
SURFACE SEARCH2
Exactly the same as above but the false bottom is set at a depth of 4 times
the jigging length.
OWN SYSTEMS
The user can store his settings in his own system 1 to 5. Moving the cursor
to the desired system (1-5) and pressing the MINUS pad does this. Then the
reel stores the values of all the parameters on screen one and also the type of
jig. After this, the configuration can be recalled (own system activated) in the
same manner as the other fishing systems i.e. by moving the cursor to the
desired system and pressing the PLUS pad.
If an own system is activated it’s icon will be displayed at the same place on
screen one as the icons for the other factory made systems.
SCREEN THREE – Miscellaneous Parameters
BEEP
If set at a value of one the reel will emit a sound when it finds fish and when
it has hauled the line in altogether and stops. The sound when a pad is
pressed cannot be turned off.
To Next Page
Loading...