C-6000i Computerized Jigging Reel User Manual
35
UNIT
This parameter changes the unit in which the depth is shown on the display.
You can choose between meters, feet and fathoms. Below the icon there is a
label that indicates the current unit (m = meters, ft = foot, fa = fathoms).
WEIGHT OF SINKER
This parameter is not active in this version of the program. It will be used to
compensate for a sinker that does not weigh 2Kg in order to affect the fish
sensitivity as little as possible.
LINE DIAMETER
This parameter is not active in this version of the program. It will be used to
compensate for the diameter of the line on the drum when counting the
depth.
LENGTH OF LINE
This parameter is not active in this version of the program. It will be used to
compensate for the amount of line on the drum when counting the depth.
MAGNIFIED VIEW
When not at zero, the active icon (the one that is flashing) on the screen will
be magnified and will appear twice as large. The parameter determines how
many times an icon must have flashed before it is magnified.
If this parameter has a value of 2 (the default value) then the active icon will
flash twice before it is magnified.
SCREEN ZERO - Communication
If the minus pad is pressed when the SCREEN icon is flashing and the reel is
in stop position then the communication screen will appear. The
communication feature allows up to five reels to be connected together,
along with an external whistle and remote control.
At the moment only a few communication features are included but future
versions of the program will include a number of them.
The communication capability of the reel makes it possible to upgrade the
program very easily and without touching a single screw in the reel. All
C−6000i jigging reels include the program upgrade capability no matter
which version of the program is in use.
Before any of the communication features can be used the following
parameters must be set correctly.
To Next Page
Loading...