C-6000i Computerized Jigging Reel User Manual
APPENDIX B 1
APPENDIX B - ACCESSORIES
External Audio
Available for the C-6000i jigging
machine is an external audio
transducer, which connects to the
jigging machine via the two
communication wires. This is for
those who want to make sure that
they always know when the jigging
reel is hauling fish. The sound effect
is considerably high but can be varied
a bit with a manual volume control on
the transducer.
Five jigging machines can share one
audio transducer, each one having
distinct sound scenario.
The audio transducer is watertight and can be placed either inside or outside.
See also the section EXTERNAL WHISTLE page 36.
Remote Control
In future a remote control will be available for the C-6000i jigging machine.
It will allow the user to control the jigging machine remotely from the cabin
and it will be able to show the status of each reel e.g. the depth counter, if it
is hauling or jigging etc.
It will utilize the two communication wires in the power cable of the jigging
machine to communicate with each machine.
To Next Page
Loading...