User Manual C-6000i Computerized Jigging Reel
2
OVERVIEW
Main Features of the C-6000i Jigging Reel
The C-6000i is a very sophisticated fishing device. The basic task of the
machine can be divided into three parts. The first one is to pay out the line
with a leader and a sinker at its very end and detect when the sinker hits the
bottom. The second one is to perform some jigging action to attract the fish
and detect when the fish bites the hooks. The third one is to haul the fish up
to the surface.
Some of the C-6000i features include:
q Low current consumption, high efficiency.
q Operates on both 12V and 24V electrical systems.
q Completely watertight
q Communications between machines
q Built in and user definable fishing systems
q Search systems
q Adapts to almost every circumstance.
q Fishing system for squid and mackerel.
q User definable jigging movement (learns to jig).
Manual Overview
This manual is written to serve as a complete guide for the installation and
use of the C-6000i jigging reel for both experienced users and beginners. It
consists of the following sections:
INSTALLATION
This section describes the installation of the reel i.e. how it should be
mounted and its connection to the electrical system. A short description
about how the line is installed on the drum is also included.
DISPLAY
The display shows a lot of information for the user. This section describes
how the information is organized on the display.
CONTROLLING THE REEL
The reel is controlled by means of only four touch pads. This section
describes how they are used.
SCREENS
To Next Page
Loading...