57
2. Remove grass, foliage, grease and oil before
storing the mower. Do not place any objects on
top of the mower.
3. Check all the screws and nuts once more
before you start to use the lawn mower again.
Tighten any loose screws.
4. Also be sure to empty the grass basket.
5. Pull the spark plug boot to prevent
unauthorized use.
6. Ensure that you do not park the mower next to
any source of danger. Petrol fumes can lead to
explosions.
7. Only original parts or parts approved by
the manufacturer may be used for repairs (see
address on the warranty certicate).
8. If the lawn mower is not going to be used for
an extended period, empty the petrol tank using
a petrol suction pump.
9. Tell your children not to use the mower. It is
not a toy.
10. Never place petrol near an ignition source.
Always use a can that is approved to store petrol.
Keep petrol away from children.
11. Oil and maintain the machine.
12. How to switch o the engine:
All you have to do to switch o the engine is
release the engine start/stop lever pull the
spark plug boot from the spark plug boot in order
to prevent the engine from restarting. Before
you start the engine again, check the cord for
the engine brake. Check that the cord is correctly
tted. If the cord is kinked or damaged, it should
be replaced.
7. Cleaning, maintenance, storage,
transport and ordering of spare parts
Important:
Never work on or touch conducting parts on the
ignition unit with the engine running. Always
pull the spark plug boot from the spark plug
before starting any work of care or maintenance.
Never perform any work on the machine while
it is running. Any work not described in these
Operating Instructions must be performed by an
authorized service workshop only.
7.1 Cleaning
The lawn mower should be thoroughly cleaned
after every use, especially the underneath and
the blade mount. To do so, tip the lawn mower
onto its left side (the opposite side to the oil
lling socket).
Important: Before you tip the lawn mower onto
its side, completely empty the fuel tank using a
petrol suction pump. The lawn mower must never
be tilted by more than 90 degrees. Dirt and grass
is easiest to remove immediately after you have
nished mowing the grass. Dried on grass and
dirt can result in poorer mowing performance.
Check that the grass chute is free of any residual
grass. Remove any such residue. Never clean the
lawn mower with a water jet or high-pressure
cleaner. The engine must remain dry. Do not use
aggressive cleaning agents such as cold cleaner
or petroleum ether.
7.2 Maintenance
7.2.1 Wheel axles and wheel hubs
These should be lightly greased once a season. To
do so, remove the wheel caps with a screwdriver
and slacken the fastening screws on the wheels.
7.2.2 Blade
For safety reasons you should only ever have
your blade sharpened, balanced and mounted
by an authorized service workshop. For optimum
results it is recommended that the blade should
be inspected once a year.
Changing the blade
Only ever use original spare parts when having
the blade replaced. The marking on the blade
must be matched with the number given in the
list of spare parts. Never have any other model of
blade tted.
To Next Page
Loading...