Need help?Do you have a question about the DOCTOR SMILE WISER 3 and is the answer not in the manual?
General| Brand | DOCTOR SMILE |
|---|---|
| Model | WISER 3 |
| Category | Measuring Instruments |
| Language | English |
Lists different models of the Diode Laser and their specifications.
Specifies qualified personnel and suitable locations for device operation.
Discusses patient eligibility, applications, and potential side effects.
Explains the meaning of warning and information symbols used in the manual.
Lists and illustrates the device's interchangeable parts (handpieces, tips).
Critical warnings regarding electrical safety, unauthorized use, and flammable environments.
Important cautions about touching connectors, using defective parts, and liquids.
States device stability and emission stability within tolerance.
Lists essential safety practices for operators, including eyewear and avoiding reflections.
Details requirements for preparing the laser's working area and access control.
Warns about potential ignition of materials and flammable gases due to laser use.
Declares the device's compliance with EU directives for medical devices.
Explains the meaning of the CE marking on the product.
Lists and explains the information found on the device's nameplate.
Clarifies manufacturer responsibility and device operation characteristics.
User accepts inherent risks by using the device and following safety instructions.
Instructions for verifying the received package contents and condition.
Specifies required ambient conditions (temperature, humidity, pressure) for the device.
Details crucial installation steps and precautions for safe operation.
Outlines electrical specifications and precautions for power connection.
Provides guidelines for handling, shipping, and storing the device.
Provides a visual overview of the device's main components and controls.
Instructions on how to bend the laser tips using the provided tool.
Step-by-step guide for attaching and detaching laser tips from the handpiece.
Describes how to disassemble and maintain the handpiece, including lens cleaning.
Guide for the initial activation process of the device, online or offline.
Instructions on how to turn on the device and log in.
Explains the different operating modes (LAP, ADV, UBE) and how to select treatments.
Steps to activate the laser emission (Standby, Ready, Operate modes).
How to use the emergency stop button to interrupt laser emission.
Explains the function of the Ready and Operate LEDs.
Details the options available in the device's settings menu.
How to access protocol instructions and specific information for treatments.
Instructions for properly turning off the laser device.
Information on using the internal battery and recharging procedures.
Details the use of USB and Wi-Fi for software updates and technical assistance.
Warns about verifying fiber integrity and contacting service if issues arise.
Outlines recommended periodic maintenance and calibration by authorized technicians.
Provides general cleaning instructions and precautions for the device.
Details electromagnetic emission compliance and guidance for the environment.
Details electromagnetic immunity compliance and guidance for the environment.
Provides recommended separation distances for RF communication equipment.
Instructions and warnings regarding electrostatic discharge risks and precautions.
Information on the proper disposal of the device according to WEEE regulations.
To Next Page