Symptom:
*ANY OR ALL GAUGE POINTER(S) ON WRONG SIDE OF STOP
POSSIBLE CAUSES
INSTRUMENT CLUSTER
TEST ACTION APPLICABILITY
1 To repair any or all gauges with the pointer on the wrong side of the stop, perform
either of the following procedures:
Procedure 1:
Turn the ignition off.
Remove the #4 Fuse from the Fuse Block.
Turn the ignition on, then off.
Reinstall the #4 Fuse to the Fuse Block.
Procedure 2:
Perform the Instrument Cluster self-test.
Turn the ignition off.
Press and hold the Trip Reset button.
Turn the ignition on.
Did the gauge pointer(s) in question return to the proper position?
All
Yes → Test Complete.
No → Replace the Instrument Cluster in accordance with the Service
Information.
Perform BODY VERIFICATION TEST - VER 1.
154
INSTRUMENT CLUSTER