Symptom:
*INTRUSION SENSOR REPEATEDLY TRIGGERS VTSS (EXPORT
ONLY)
POSSIBLE CAUSES
INTRUSION SENSOR
REMOTE KEYLESS ENTRY MODULE
TEST ACTION APPLICABILITY
1 NOTE: Ensure there are no hanging objects or loose seat belts causing the
false triggering.Also, ensure there is no dust or debris around the intrusion
sensor causing the false triggering.
Disconnect the Dome Lamp/Intrusion Sensor connector.
Close all the doors and arm the VTSS.
Does the alarm inadvertently trigger due to intrusion sense even though the sensor
is disconnected?
All
Yes → Replace the Remote Keyless Entry Module in accordance with the
Service Information.
Perform VTSS VERIFICATION TEST - 1A.
No → Replace the Intrusion Sensor in accordance with the Service
Information.
Perform VTSS VERIFICATION TEST - 1A.
222
VEHICLE THEFT/SECURITY