TEST ACTION APPLICABILITY
1 NOTE: Ensure that the battery is fully charged.
IF THE MODULE IS DROPPED AT ANY TIME, IT MUST BE REPLACED.
Turn the ignition on.
From the list below, select the appropriate module and DTC type for the this
diagnostic trouble code.
NOTE: For the purpose of this test, the AECM and ORC modules will be
referred to as an ACM.
Select the appropriate module and type of DTC
All
ACM - ACTIVE
Replace the Airbag Control Module in accordance with Service
Instructions.
Perform AIRBAG VERIFICATION TEST - VER 1.
ACM - STORED
Go To 2
LEFT SIACM - ACTIVE
WARNING: TURN THE IGNITION OFF, DISCONNECT THE
BATTERYAND WAIT TWOMINUTES BEFORE PROCEEDING.
Replace theLeft SideImpactAirbag ControlModule in accordance
with Service Instructions.
Perform AIRBAG VERIFICATION TEST - VER 1.
LEFT SIACM - STORED
Go To 2
RIGHT SIACM - ACTIVE
WARNING: TURN THE IGNITION OFF, DISCONNECT THE
BATTERYAND WAIT TWOMINUTES BEFORE PROCEEDING.
Replace the Right Side Impact Airbag Control Module in accor-
dance with Service information.
Perform AIRBAG VERIFICATION TEST - VER 1.
RIGHT SIACM - STORED
Go To 2
54
AIRBAG
NO PCI TRANSMISSION — Continued
To Next Page
Loading...
