EasyManua.ls Logo

Dodge 2004 Neon SX2 - High Beam Headlamps will Not Turn off

Dodge 2004 Neon SX2
922 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Symptom:
*HIGH BEAM HEADLAMPS WILL NOT TURN OFF
POSSIBLE CAUSES
DIMMER SWITCH HIGH BEAM OUTPUT CIRCUIT SHORT TO VOLTAGE
INSTRUMENT CLUSTER
MULTIFUNCTION SWITCH
TEST ACTION APPLICABILITY
1 Remove Circuit Breaker 2 from the Fuse Block.
Do the High Beam Headlamps turn off?
All
Yes Go To 2
No Repair the Dimmer Switch High Beam Output Circuit for a short
to voltage condition.
Perform BODY VERIFICATION TEST - VER 1.
2 Disconnect the Instrument Cluster connector.
Disconnect the Multifunction Switch connector.
Measure resistance of the Dimmer Switch High Beam Output Circuit to ground.
Is the resistance below 5.0 ohms?
All
Yes Replace the Instrument Cluster.
Perform BODY VERIFICATION TEST - VER 1.
No Replace the Multifunction Switch.
Perform BODY VERIFICATION TEST - VER 1.
135
EXTERIOR LIGHTING

Table of Contents

Related product manuals