Symptom:
CD CHANGER READ FAILURE
When Monitored and Set Condition:
CD CHANGER READ FAILURE
When Monitored: Continuously with the ignition and CD Changer turned on.
Set Condition: The code will set if a CD that is not formatted as a music CD is installed
in the CD Changer.
POSSIBLE CAUSES
CD CHANGER READ FAILURE
TEST ACTION APPLICABILITY
1 Replace the problem CD with a good, clean, unscratched, music CD.
Turn the radio on and select the good CD.
With the DRBIIIt, read DTC’s.
Does the DRBIIIt display CD CHANGER READ FAILURE?
All
Yes → Replace the CD Changer.
Perform BODY VERIFICATION TEST - VER 1.
No → Test Complete.
89
AUDIO
To Next Page
Loading...
