UConnect™ system. To select a phone from the list,
press the ’Voice Recognition’ button and say ⬙Select⬙.
•
The lower priority phone will only be used for the next
phone call. After that, the UConnect™ system will
return to using the highest priority phone in the
vehicle.
UConnect™ System Features
Barge In - Touch Tone Phone Inputs
You can use your UConnect™ system to access a voice mail
system, an automated service, or any other phone number
that you can dial with any phone. When calling a number
with your UConnect™ system that normally requires you to
enter in a touch-tone sequence on your cellular phone
keypad, you can push the ’Voice Recognition’ button and
say the sequence you wish to enter followed by ⬙Send⬙. For
example, if required to enter your pin number, you can press
the ’Voice Recognition’ button and say ⬙3746Send⬙,or
whatever you have made your pin. This method can also be
used in instances where you are pressing a number on your
keypad to navigate through a menu structure or to enter a
number for a pager.
Barge In - Overriding Prompts
The ’Voice Recognition’ button can be used when you
wish to skip part of a prompt and issue your voice
recognition command immediately. For example, if a
prompt is playing ⬙Would you like to pair a phone, clear
aѧ⬙, you could press the ’Voice Recognition’ button and
say ⬙Pair A Phone⬙ to select that option without having to
listen to the rest of the voice prompt.
Language Selection
To change the language that the UConnect™ system is
using, press the ’Phone’ button and say the name of the
language you wish to switch to (English, Español, or
Français as equipped). After selecting one of the lan-
guages, all prompts and voice commands will be in the
selected language.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105
3
To Next Page
Loading...
