Autostick姞 Operation
NOTE: Autostick威 is not functional until the CVT
warms up in cold weather.
Autostick威 operation is activated in the DRIVE position
by moving the shift lever side-to-side. Moving the shift
lever to the (+) side will activate Autostick威 and shift up
to the next higher manual ratio, unless you are already
operating in or near Overdrive, in which case 6th ratio
will be selected. In like manner, moving the shift lever to
(-) will activate Autostick威 and shift to the next lower
manual ratio. After Autostick威 is activated, the manual
ratio selected is displayed in the transmission ratio
display and tipping the shift lever to the (+) or (-)
direction will cause an upshift or downshift by one ratio.
Autostick威 Shifter
240 STARTING AND OPERATING
To Next Page
Loading...
