Keyless Go
This function allows the driver to
operate the ignition switch with
the push of a button, as long as the
ENGINE START/STOP button is
installed and the Keyless Go igni-
tion key (FOBIK) is in the passen-
ger compartment.
Installing And Removing The Engine Start/Stop
Button
1. Remove the ignition key (FOBIK).
2. Insert the ENGINE START/STOP button into the
ignition switch.
NOTE: The ENGINE START/STOP button can be re-
moved from the ignition switch (WIN) for regular igni-
tion key (FOBIK) use.
Keyless Go Functions — With Driver’s Foot Off The
Brake Pedal (In PARK Position)
•
Press the ENGINE START/STOP button once to acti-
vate the radio, wipers, and windows.
•
Press the ENGINE START/STOP button twice to
activate the heating/air conditioning (HVAC) controls,
and the instrument cluster.
•
Press the ENGINE START/STOP button three times to
turn off the ignition switch.
Keyless Go Functions - With Driver’s Foot On The
Brake Pedal (PARK or NEUTRAL Gear Position Only)
•
Press the ENGINE START/STOP button once to oper-
ate all of the accessories.
•
Press the ENGINE START/STOP button twice to start
the engine.
216 STARTING AND OPERATING
To Next Page
Loading...
