hold may not become active automatically. This is cell
phone dependent. To bring the call back from hold, press
and hold the “Phone” button until you hear a single
beep.
Redial
•
Press the “Phone” button to begin.
•
After the 9Ready9 prompt and the following beep, say
9Redial.9
•
The UConnectt system will call the last number that
was dialed on your cellular phone.
NOTE: This may not be the last number dialed from the
UConnectt system.
Call Continuation
Call continuation is progression of a phone call on
UConnectt system after the vehicle ignition key has been
switched to off. Call continuation functionality available
on the vehicle can be any one of three types:
•
After ignition key is switched off, a call can continue
on the UConnectt system either until the call ends or
until the vehicle battery condition dictates cessation of
the call on the UConnectt system and transfer of the
call to the mobile phone.
•
After ignition key is switched to off, a call can continue
on the UConnectt system for certain duration, after
which the call is automatically transferred from the
UConnectt system to the mobile phone.
•
An active call is automatically transferred to the
mobile phone after ignition key is switched to off.
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
To Next Page
Loading...
