125
Controls in detail
Seats
3
Removing the rear bench seat with 2
or 3 seats
The locking lever is located underneath
the bench seat, on the feet of the bench
seat.
Turn all levers 1 for the bench seat
fully upward.
The rear bench seat moves back into
the seat mounting cups on the vehic-
le floor.
Lift the rear bench seat upward out
of the seat mounting cups.
Warning (Continued) G
For reasons of safety, only have seat
mounting cups retrofitted at an autho-
rized Sprinter Dealer.
i
Do not exceed the maximum permis-
sible number of seats for passenger
vans.
!CAUTION
For safety reasons, the rear bench
seat with 4 seats must only be remo-
ved or installed by a qualified specia-
list workshop, e.g., an authorized
Sprinter Dealer.
1 Lever
nf_BA.book Page 125 Friday, January 25, 2008 3:53 PM
To Next Page
Loading...
