192
Controls in detail
Driving and parking
3
Applying the handbrake
Pull lever 1 up as far as the last de-
tent.
The
7 indicator lamp in the in-
strument cluster lights up while the
engine is running.
Releasing the handbrake
Raise lever 1 slightly and press re-
lease knob
2.
Guide lever 1 down to the stop.
The
7 indicator lamp in the in-
strument cluster goes out.
Emergency braking
Normally, you are only permitted to ap-
ply the handbrake when the vehicle is
stationary.
In exceptional cases, the handbrake can
be used for emergency braking if the
service brake fails.
Keep release knob 2 pressed and
carefully apply lever
1.
i
On vehicles with a folding handbrake
lever, you can then press lever
1
down to the stop.
i
On vehicles with a folding handbrake
lever, you must first pull lever
1 up
to the stop.
nf_BA.book Page 192 Friday, January 25, 2008 3:53 PM
To Next Page
Loading...
