220
Controls in detail
Air conditioning
3
Open as required:
the center air vents
the side air vents
the ventilation vents
Switch air-conditioning system on
(
page 218) if necessary.
The temperature is set using temperatu-
re selector control
1 in the control pa-
nel (
page 218).
The recommended setting for the target
temperature is 72°F (22°C) under nor-
mal conditions, to which the air-condi-
tioning system adjusts as rapidly and as
comfortably as possible.
Only change the temperature in small in-
crements.
To increase: turn the temperature
selector control clockwise.
To reduce: turn the temperature se-
lector control slightly counterclock-
wise.
1 Airflow control
To increase: press the Q airflow
control.
To reduce: press the airflow
control.
Setting the temperature
i
If you use the basic settings for heat-
ing or ventilating the vehicle, you will
only rarely need to adjust the tem-
perature, airflow and air distribution
(
page 219).
Setting the airflow
N83.00-2125-31
nf_BA.book Page 220 Friday, January 25, 2008 3:53 PM
To Next Page