420
Operation
Cleaning and care of the vehicle
4
Steps Engine cleaning Light-alloy wheels*
Clean light-alloy wheels on a regular ba-
sis.
Warning G
Dirty or iced-up steps and entrances cre-
ate a risk of slipping or falling.
Keep steps, entrances and footwear free
from dirt (e.g. mud, clay, snow and ice).
!CAUTION
Do not allow water to enter the in-
take and ventilation openings.
When cleaning with high-pressure
water or steam cleaners, the spray
must not be aimed directly at electri-
cal components or at the end of elec-
trical lines.
Treat the engine with preservative
agents after cleaning. Protect the
belt drive system from the preserva-
tive when you do so.
!CAUTION
Do not use any acidic or alkaline
cleaning agents. They can cause cor-
rosion of the wheel bolts (wheel
nuts) or the balancing weight retain-
ers.
nf_BA.book Page 420 Friday, January 25, 2008 3:53 PM
To Next Page
Loading...
