41
Safety
Occupant safety
2
To raise the belt height: slide belt
sash guide
1 upward.
Belt sash guide
1 engages in vari-
ous positions.
To lower the belt height: press and
hold release button
5.
Slide belt sash guide 1 to the de-
sired height.
Let go of release button 5 and
make sure that belt sash guide
1
engages.
The SRS (S
upplemental Restraint Sys-
tem) may consist of the following com-
ponents, depending on the equipment
level:
1 warning lamp
Emergency tensioning retractors
Belt force limiters
Airbag system with:
Airbag control unit
Airbags
1 warning lamp
The SRS performs a self-test at regular
intervals when the ignition is switched
on and while the engine is running. Mal-
functions can therefore be detected in
good time.
The
1 warning lamp in the instru-
ment cluster (
page 20) comes on for
approximately 4 seconds when you
switch on the ignition.
SRS (Supplemental Restraint
System)
nf_BA.book Page 41 Friday, January 25, 2008 3:53 PM
To Next Page
Loading...
