528
Practical hints
Changing bulbs
5
Press catches 1 down.
Swing housing cover 2 in the direc-
tion of the arrow and remove it.
3 Low-beam headlamps
4 Halogen high-beam headlamps/xenon
headlamp cornering lamp*
Pull the connector off the bulb hold-
er.
Unclip the retainer spring and re-
move the bulb.
Insert the new bulb such that the
base locates in the recess of the bulb
holder.
Clip on the retainer spring and plug
the connector onto the bulb.
Insert housing cover 2 into lower
brackets.
Swing housing cover 2 toward
headlamp casing.
Pull first the inner and then the outer
catch
1 upward until it audibly en-
gages in place.
Turn signals
1 Bulb holder
nf_BA.book Page 528 Friday, January 25, 2008 3:53 PM
To Next Page
Loading...
