552
Practical hints
Flat tire
5
Removing a wheel
Unscrew the wheel bolts or wheel
nuts.
For wheels with wheel nuts remove
the wheel nut cover.
Remove the wheel.
Mounting the new wheel
Clean the wheel and wheel hub con-
tact surfaces.
!CAUTION
Do not place the wheel bolts or the
wheel nuts in sand or dirt. The bolt
and wheel hub threads could other-
wise be damaged.
Warning G
Replace the wheel bolts and wheel nuts if
they are damaged or have become rusty.
Never oil or grease wheel bolts or wheel
nuts.
If a wheel hub thread is damaged, you
must not drive the vehicle.
Consult an authorized Sprinter Dealer
which has the necessary specialist knowl-
edge and tools to carry out the work re-
quired.
Continued
Warning (Continued) G
The manufacturer recommends that you
use an authorized Sprinter Dealer for this
purpose. In particular, work relevant to
safety or on safety-related systems must
be carried out at an authorized Sprinter
Dealer.
For safety reasons, the manufacturer rec-
ommends that you only use wheel bolts
and wheel nuts which have been ap-
proved for Sprinter vehicles. Other wheel
bolts or wheel nuts could work loose.
nf_BA.book Page 552 Friday, January 25, 2008 3:53 PM
To Next Page
Loading...
