618
*Technical data
Service products and capacities
6
Service interval Product name/product number MB sheet MS-No.
1
Engine cooling system
Whenever the coolant is replaced, a concentration of 50% by volume of corrosion inhibitor/antifreeze should be maintained. This
provides antifreeze protection down to -34,6 °F (-37 °C).
Do not exceed a concentration of 55% by volume (antifreeze protection down to approximately -49 °F (-45 °C)), as the heat dissi-
pation properties deteriorate at higher concentrations.
Observe the Mercedes-Benz Specifications for Service Products, Sheet 325.
Coolant, anticorrosion/
antifreeze fluid
1st interval:
15 years or
180,000 mi
(288,000 km)
2
Subsequent
intervals:
5 years or 90,000
mi (144,000 km)
2
EURO Peak Coolant/Antifreeze
OLD WORLD INDUSTRIES
325.0
9769
Zerex G05, The Valvoline Company 325.0
Zerex G48, The Valvoline Company 325.0
Glysantin G05, BASF AG
MOPAR
®
Part No. 05066386AA, or equivalent
325.0
nf_BA.book Page 618 Friday, January 25, 2008 3:53 PM
To Next Page
Loading...
