97
Controls in detail
Opening and closing
3
2 Outside door handle
Briefly press button 1 or pull out-
side door handle
2.
The sliding door opens or closes.
When closing, a signal sounds.
Press button 1 again or pull outside
door handle
2 again.
The sliding door stops.
Opening/closing with the remote
control
Press and hold the button for
more than half a second.
The sliding door unlocks and opens
or closes.
Press the button again.
The sliding door stops.
Programming the remote control
If the vehicle is equipped with 2 sliding
doors, it is only possible to program the
remote control for one of the sliding
doors.
1 Switch for sliding door on left-hand side
2 Switch for sliding door on right-hand side
N72.16-2136-31
nf_BA.book Page 97 Friday, January 25, 2008 3:53 PM
To Next Page
Loading...
