maintain for each zone. On Three-Zone ATC systems, if
so desired, push and release the SYNC button. Then turn
the Left Front Temperature Control to dial in the tem-
perature that you want the system to maintain for all
three zones.
Once the comfort level is selected, the system will main-
tain that level automatically using the heating system.
Should the desired comfort level require A/C, the system
will automatically make the adjustment. You will expe-
rience the greatest efficiency by simply allowing the
system to function automatically. 72°F (22°C) is the
recommended setting for maximum comfort for the
average person; however, this may vary.
NOTE:
•
The temperature setting can be adjusted at anytime
without affecting automatic operation.
•
Pressing the A/C button, or adjusting the blower
speed, or changing the mode of air distribution while
in AUTO mode will cancel automatic operation.
Automatic Operation — Rear-Zone ATC
1. Press the REAR button on the Three-Zone ATC in the
instrument panel to turn ON the Rear-Zone ATC in the
overhead console.
2. Turn the Rear Blower control on the Rear-Zone ATC in
the overhead console to the AUTO position.
3. Turn the Rear Temperature control on the Rear-Zone
ATC in the overhead console to dial in the temperature
that you want the system to maintain in the rear cabin.
NOTE:
•
The temperature setting can be adjusted at anytime
without affecting automatic operation.
UNDERSTANDING YOUR INSTRUMENT PANEL 299
4
To Next Page
Loading...
