SWIVEL N’ GO™ SEATING WITH TABLE
To Swivel The Seats
•
Pull the lower handle on the outboard side of the seat and push the side of the seatback to
begin rotation. Once the seat begins to rotate, the handle may be released. The seat locks
in position once reaching the forward or rearward positions only.
Table Installation
• Open the floor storage cover in front of the second row seats.
• Remove the pole and table top by loosening the hook and loop straps.
• Pull the lower handle to swivel the second row seats so they are facing the rear.
• Insert the pole into the base by aligning the lock button into the notch of the base.
• Twist the pole in a clockwise rotation until it stops.
NOTE: You will hear an audible “click” when the lock buttons engage.
• Place the table top over the installed pole aligning with the mating feature of the
underside of the table top. Apply pressure on the table top and press downward.
27
OPERATING YOUR VEHICLE
To Next Page
Loading...
