FLUIDS AND CAPACITIES
Component
Fluid, Lubricant, or Genuine
Part
Capacities
Engine Coolant - 3.3L and
3.8L and 4.0L
MOPAR
®
Antifreeze/Coolant
Five Year /100,000 Mile
Formula HOAT ( Hybrid
Organic Additive Technology)
or equivalent.
13.4 Quarts (12.6 Liters )
Includes heater and
coolant recovery bottle
filled to MAX level. Add
2.9 Quarts (2.8 Liters) if
equipped with rear heater.
Engine Oil with Filter 4.0L API certified 10W-30 engine
oil, Meeting the
requirements of Chrysler
Material Standard MS-6395.
Refer to your oil filler cap for
correct SAE grade.
5.5 quarts (5.2 Liters)
Engine Oil with Filter 3.3L
and 3.8L
API certified 5W-20 engine
oil, Meeting the
requirements of Chrysler
Material Standard MS-6395.
Refer to your oil filler cap for
correct SAE grade.
5 Quarts (4.7 Liters)
Fuel Selection 3.3L and
3.8L
87 Octane 20 Gallons (76 Liters)
Fuel Selection 4.0L 87 Octane acceptable – 89
Recommended.
20 Gallons (76 Liters)
Engine Oil Filter 3.3L and
3.8L
MOPAR
®
Engine Oil Filter or
equivalent.
—
Engine Oil Filter 4.0L MOPAR
®
Engine Oil Filter or
equivalent.
—
Spark Plug 3.3L and 3.8L RE14PLP5 (Gap 0.050 in
[1.27 mm])
—
Spark Plugs 4.0L ZFR5LP-13G (Gap 0.050 in
[1.27 mm]) —
Automatic Transaxle MOPAR
®
ATF+4
®
Automatic
Transmission Fluid or
equivalent licensed ATF+4
®
product.
—
Brake Master Cylinder MOPAR
®
DOT 3 and SAE
J1703 should be used or
equivalent. If DOT 3 is not
available, then DOT 4 is
acceptable. Use only
recommended brake fluids.
—
Power Steering Reservoir MOPAR
®
Power Steering
Fluid +4 or MOPAR
®
ATF+4
®
Automatic Transmission Fluid
or equivalent licensed
ATF+4
®
product.
—
65
MAINTAINING YOUR VEHICLE
To Next Page
Loading...
