EasyManua.ls Logo

Dodge 2010 Journey - Page 43

Dodge 2010 Journey
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation Of The RBZ Radio
To view a DVD press the OPEN/CLOSE hard-key and insert the disc. Playback will begin
automatically after the DVD is recognized by the disc drive. If playback does not begin
automatically follow these steps:
Press the MENU hard-key, then touch the REAR VES™ soft-key. If a chapter list appears
on the right side of the screen touch the HIDE LIST soft-key to display the Rear VES™
Control screen.
Touch the 1 soft-key to select an audio channel then touch the DISC soft-key in the
MEDIA column.
SIRIUS Backseat TV™
Press the MENU hard-key, then touch the REAR VES™ soft-key. If a chapter list
appears on the right side of the screen touch the HIDE LIST soft-key to display the
Rear VES™ Control screen.
Touch the 1 soft-key to select an audio channel then touch the TV soft-key in the
RADIO column to select SIRIUS Backseat TV™.
Operation Of The REU Radio
To view a DVD video insert a video disc. Playback will begin automatically after the
DVD is recognized by the disc drive. If playback does not begin automatically follow
these steps:
Press the MENU button, then turn the CENTER CONTROL knob and press the JOYSTICK
to select VES™ CONTROLS.
Select channel 1 or 2, then select DISC.
Turn the CENTER CONTROL knob to select FUNCTIONS, then select SHOW VIDEO.
SIRIUS Backseat TV™
Press the RADIO button, to highlight SATV, then press the LIST button to display a
list of available video channels.
Select the desired channel, then press the MENU button and select SHOW VIDEO.
Operation Of The Remote
The remote control operates similarly to any DVD remote you have used before and
allows the rear seat passengers to change stations, tracks, discs and audio/video
modes.
The remote control is designed to control either channel by using the selector switch
located on the right side of the remote.
Pressing the power button will turn the VES™ system ON/OFF.
Pressing the MODE button causes the Mode Selection menu to appear on the VES™
screen. Use the remote control arrow buttons to scroll through the available modes,
then press ENTER to select the desired mode.
41
ELECTRONICS

Table of Contents

Other manuals for Dodge 2010 Journey

Related product manuals