EasyManua.ls Logo

Dodge 2010 Viper - FUSES; Power Distribution Center

Dodge 2010 Viper
316 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CAUTION!
Use care when approaching parking blocks, tall
speed bumps and garage curbs. These surfaces can
damage your splitter.
Use caution when driving up to sloped surfaces or over
speed bumps. Approaching a speed bump or a slope at a
slight angle may improve your clearance.
CAUTION!
Hard contact with steep ramps may cause damage
to your splitter.
Replace rub strips when they are worn down to
3/8 inch (10 mm) on the front edge. This will avoid
damage to the carbon fiber panel
WARNING!
Do not install the ACR track extension and/or dive
planes on a vehicle equipped with the Aero Group
option. The aerodynamic balance of this set up is
unstable and can cause the loss of control.
7
MAINTAINING YOUR VEHICLE 243

Table of Contents

Related product manuals