EasyManua.ls Logo

Dodge 2012 Challenger - Speed Control

Dodge 2012 Challenger
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instrument Panel Dimmer
Rotate the dimmer control to the extreme bottom position to fully dim the
instrument panel lights and prevent the interior lights from illuminating when a
door is opened.
Rotate the dimmer control up to increase the brightness of the instrument panel
when the parking lights or headlights are on.
Rotate the dimmer control up to the next detent position to fully brighten the
odometer and radio when the parking lights or headlights are on. Refer to your
Media Center/Radio User Manual on the DVD for display dimming.
Rotate the dimmer control up to the last detent position to turn on the interior
lighting.
SPEED CONTROL
The speed control switches are located
on the steering wheel.
Cruise ON/OFF
Push the ON/OFF button to activate
the Speed Control.
CRUISE
will appear on the
instrument cluster to indicate the
Speed Control is on.
Push the ON/OFF button a second time
to turn the system off.
Set
With the Speed Control on, push and
release the SET button to set a
desired speed.
Accel/Decel
Once a speed is set, pushing the RES + button once or the SET button once will
increase or decrease the set speed approximately 1 mph (2 km/h).
Push and hold the RES + button to accelerate in 5mph (8 km/h) increments or
push and hold the SET button to decelerate in 5mph (8 km/h) increments;
release the button to save the new set speed.
Resume
To resume a previously selected set speed in memory, push the RES + button and
release.
Cancel
Push the CANCEL button, or apply the brakes to cancel the set speed and
maintain the set speed memory.
Push the ON/OFF button to turn the system off and erase the set speed memory.
OPERATING YOUR VEHICLE
23

Table of Contents

Other manuals for Dodge 2012 Challenger

Related product manuals