Dodge 2013 Challenger SRT8 - Fluids and Capacities - Non Srt8

FLUIDS AND CAPACITIES - NON SRT8
Component Fluid, Lubricant, or
Genuine Part
Capacities
Engine Coolant– 3.6L Engine We recommend you use
MOPAR® Antifreeze/ Coolant
10 Year/150,000 Mile Formula
OAT (Organic Additive
Technology).
11.1 Quarts (10.5 Liters)
Includes heater and coolant
recovery bottle filled to
MAX level.
Engine Coolant– 5.7L Engine We recommend you use
MOPAR® Antifreeze/ Coolant
10 Year/150,000 Mile Formula
OAT (Organic Additive
Technology).
14.7 Quarts (13.9 Liters)
Includes heater and coolant
recovery bottle filled to
MAX level.
Engine Oil with Filter–
3.6L Engine
We recommend you use API
Certified SAE 5W-20 engine
oil, API Certified. Refer to
your engine oil filler cap for
correct SAE grade.
6 Quarts (5.6 Liters)
Engine Oil with Filter–
5.7L Engine
We recommend you use API
Certified SAE 5W-20 engine
oil, API Certified. Refer to
the engine oil filler cap for
correct SAE grade.
7 Quarts (6.6 Liters)
Engine Oil Filter We recommend you use
MOPAR® Engine Oil Filters.
—
Spark Plug– 3.6L Engine We recommend you use
MOPAR® Spark Plugs.
—
Spark Plug– 5.7L Engine We recommend you use
MOPAR® Spark Plugs.
—
Automatic Transmission We recommend you only use
MOPAR® ATF+4® Automatic
Transmission Fluid.
Failure to use ATF+4 fluid
may affect the function
or performance of your
transmission.
—
Manual Transmission We recommend you use
MOPAR® ATF+4® Automatic
Transmission Fluid.
—
Axle Rear– 5.7L Engine We recommend you use API
GL-5 SAE 75W90 Synthetic
Gear Lubricant (with MOPAR®
Friction Modifier-Hypoid Gear
Additive).
—
Axle Rear– 3.6L Engine
We recommend you use API
GL-5 SAE 75W140 Synthetic
Gear Lubricant.
—
MAINTAINING YOUR VEHICLE
107