Component Fluid, Lubricant, or
Genuine Part
Capacities
Brake Master Cylinder We recommend you use
MOPAR® DOT 3 and
SAE J1703. If DOT 3 is not
available, then DOT 4 is
acceptable.
—
Power Steering Reservoir
We recommend you use
MOPAR® Hydraulic Fluid
meeting Chrysler Material
Standard MS-11655.
—
Fuel Selection– 3.6L Engine
87 Octane Acceptable.
89 Octane Recommended
19.1 Gallons (72 Liters)
(Approximate)
Fuel Selection– 5.7L Engine 91 Octane Recommended
19.1 Gallons (72 Liters)
(Approximate)
E-85 FLEXIBLE FUEL– (3.6L Engine Only)
• Refer to your Owner's Manual on the DVD for further details.
CAUTION!
Only vehicles with the E-85 fuel filler door label or a yellow gas cap can operate on E-85.
FLUIDS AND CAPACITIES - SRT8
Component Fluid, Lubricant, or
Genuine Part
Capacities
Engine Coolant– 6.4L Engine We recommend you use
MOPAR® Antifreeze/ Coolant
10 Year/150,000 Mile Formula
OAT (Organic Additive
Technology).
15.2 Quarts (14.4 Liters)
Includes heater and coolant
recovery bottle filled to
MAX level.
Engine Oil With Filter–
6.4L Engine
For best performance and
maximum protection under
all types of operating condi-
tions, the manufacturer only
recommends full synthetic
engine oils that meet the
American Petroleum Institute
(API) categories of SM or
SM/CF. The manufacturer
recommends the use of a full
synthetic SAE 0W-40 engine
oil or equivalent.
7 Quarts (6.6 Liters)
MAINTAINING YOUR VEHICLE
108
To Next Page
Loading...
