FLUIDS AND CAPACITIES
Component Fluid, Lubricant, or Genuine
Part
Capacities
Engine Coolant– 3.6L Engine MOPAR® Antifreeze/Coolant
10–Year/150,000 Mile Formula
OAT (Organic Additive Tech-
nology) or equivalent.
13.4 Quarts (12.6 Liters) In-
cludes heater and coolant re-
covery bottle filled to MAX
level. Add 2.9 Quarts (2.8 Li-
ters) if equipped with rear
heater.
Engine Oil with Filter– 3.6L En-
gine
API certified 5W-20 engine oil,
meeting the requirements of
Chrysler Material Standard
MS-6395. Refer to your oil
filler cap for correct SAE
grade.
6 Quarts (5.6 Liters)
Engine Oil Filter– 3.6L Engine MOPAR® Engine Oil Filter or
equivalent.
—
Spark Plug– 3.6L Engine
RER8ZWYCB4 (Gap 0.043 in
[1.1 mm])
—
Automatic Transmission
MOPAR® ATF+4® Automatic
Transmission Fluid or equiva-
lent licensed ATF+4® prod-
uct.
—
Brake Master Cylinder
MOPAR® DOT 3 and SAE
J1703 should be used or
equivalent. If DOT 3 is not
available, then DOT 4 is ac-
ceptable. Use only recom-
mended brake fluids.
—
Power Steering Reservoir
MOPAR® Power Steering Fluid
+4 or MOPAR® ATF+4® Auto-
matic Transmission Fluid or
equivalent licensed ATF+4®
product.
—
Fuel Selection– 3.6L Engine 87 Octane
20 Gallons (76 Liters) (Ap-
proximate)
E-85 FLEXIBLE FUEL– (3.6L Engine Only)
CAUTION!
Only vehicles with the E-85 fuel filler door label or a yellow gas cap can operate on
E-85.
• Refer to your Owner's Manual on the DVD for further details.
MAINTAINING YOUR VEHICLE
110
To Next Page
Loading...
