Component Fluid, Lubricant, or Genuine
Part
Capacities
Spark Plugs 2.0L Engine We recommend you use
MOPAR® Spark Plugs
(Gap 0.043 in [1.1 mm])
—
Spark Plugs 2.4L Engine We recommend you use
MOPAR® Spark Plugs
(Gap 0.047 in [1.2 mm])
—
Automatic Transmission –
1.4L Turbo Engine
We recommend you use
MOPAR® C635 DDCT/MTX
Transmission Fluid.
—
Automatic Transmission –
2.0L, 2.4L Engine
We recommend you use
SK Energy ATF SP-4 Trans-
mission Fluid.
—
Manual Transmission We recommend you use
MOPAR® C635 DDCT/MTX
Transmission Fluid.
—
Brake Master Cylinder We recommend you use
MOPAR® DOT 3 SAE J1703.
If DOT 3 is not available, then
DOT 4 is acceptable. Only use
recommended brake fluids.
—
CAUTION!
• Mixing of engine coolant (antifreeze) other than specified Organic Additive Technol-
ogy (OAT ) engine coolant (antifreeze), may result in engine damage and may de-
crease corrosion protection. Organic Additive Technology (OAT) engine coolant is
different and should not be mixed with Hybrid Organic Additive Technology (HOAT)
engine coolant (antifreeze) or any “globally compatible” coolant (antifreeze). If a
non-OAT engine coolant (antifreeze) is introduced into the cooling system in an
emergency, the cooling system will need to be drained, flushed, and refilled with
fresh OAT coolant (conforming to MS-12106), by an authorized dealer as soon as
possible.
• Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not
use additional rust inhibitors or antirust products, as they may not be compatible
with the radiator engine coolant and may plug the radiator.
• This vehicle has not been designed for use with propylene glycol-based engine
coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not
recommended.
MAINTAINING YOUR VEHICLE
112
To Next Page
Loading...
Need help?
General
