• Outside Temp.
• Time
• Range to Empty
• Average L/100km (or MPG)
• Current L/100km (or MPG)
• Trip A Distance
• Trip B Distance
• Audio Inform
• Digital Speed
• None
4. Current Gear
• On
• Off (default)
5. Odometer
• Show (default)
• Hide
6. Fuel Gauge
• Standard (default)
• Detailed
7. Defaults
• Ok
• Cancel
Diagnostics — If Equipped
Push and release the UP or DOWN arrow button until
the diagnostic Menu is selected. Then, the Driver is able
to view engine and emission vehicle faults.
• Push OK to have the most recent fault code sent.
• There is a delay when the next diagnostic code is
requested during which the following message is
displayed:
• “Checking System for Diagnostic Codes.”
268 UNDERSTANDING YOUR INSTRUMENT PANEL
To Next Page