DRIVER INFORMATION DISPLAY (DID)
The DID features an driver display that is located in the instrument cluster . Pushing the
controls on the left side of the steering wheel allows the driver to select vehicle information
and Personal Settings. For additional information, refer to “Programmable Features” in
this guide.
• Push the UP
button to scroll upward
through the main menus (Speedometer,
MPH/km/h, Vehicle Info, Terrain, Driver
Assist, Fuel Economy, Trip A, Trip B,
Audio, Stored Messages, Screen Set
Up).
• Push the DOWN
button to scroll
downward through the main menu and
submenus (Speedometer , MPH/km/h,
V ehicle Info, Terrain, Driver Assist, Fuel
Economy, Trip A, Trip B, Audio, Stored
Messages, Screen Set Up).
• Push the RIGHT
button to access the
information screens or sub-menu
screens of a main menu item.
• Push the LEFT
button to access the
information screens or sub-menu
screens of a main menu item.
• Push the OK button to access/select the information screens or sub-menu screens of a
main menu item. Push and hold the OK button for two seconds to reset displayed/
selected features that can be reset.
PERFORMANCE FEATURES
Overview Of Performance Features
WARNING!
Measurement of vehicle statistics with the Performance Features is intended for
off-highway or off-road use only and should not be done on any public roadways. It is
recommended that these features be used in a controlled environment and within the
limits of the law. The capabilities of the vehicle as measured by the performance pages
must never be exploited in a reckless or dangerous manner, which can jeopardize the
user’s safety or the safety of others. Only a safe, attentive, and skillful driver can prevent
accidents.
1 — DID Controls
ELECTRONICS
135
To Next Page
Loading...
