0-60 MPH (0-100 km/h)
When selected, this screen displays the time it takes for the vehicle to go from 0 to 60
MPH (0 to 100 km/h) within 10 seconds.
• The feature will “ready” when the vehicle speed is at 0 MPH (0 km/h). The word
“READY” will flash when conditions are met for the event to begin.
• Dashes will display if the vehicle fails to reach 60 MPH (100 km/h) in less then 10
seconds.
• To clear the vehicle's best, last, and current 0-60 MPH (0-100 km/h) time, push and
hold the OK button for two seconds.
0 to 100 MPH (0 to 161 km/h)
When selected, this screen displays the time it takes for the vehicle to go from 0 to
100 MPH (0 to 161 km/h) within 15 seconds.
• The feature will “ready” when the vehicle speed is at 0 MPH (0 km/h). The word
“READY” will flash when conditions are met for the event to begin.
• Dashes will display if the vehicle fails to reach 0 to 100 MPH (0 to 161 km/h) in less
then 15 seconds.
• To clear the vehicle's best, last and current 0 to 100 MPH (0 to 161 km/h) time, push
and hold the OK button for two seconds.
Reaction Timer
Press the OK button to engage Countdown Timer. The time it takes for wheel speed not
equal to 0 MPH after the words 'GO' is your reaction time. If wheel speed is greater than
0 MPH before 'GO', the reaction time will be a negative time.
NOTE:
The Reaction Time, MPH, 1/8 Mile, and 1/4 Mile timers will be “ready” when the vehicle
is at 0 MPH (0 km/h).
1/8 Mile (200 Meters)
When selected, this screen displays the time it takes the vehicle to travel 1/8 mile within
15 seconds and the vehicle's speed when it reaches 1/8 mile.
• The feature will “ready” when the vehicle is at 0 MPH (0 km/h). The word “READY” will
flash when conditions are met for the event to begin.
• Dashes will display if the vehicle fails to reach 1/8 mile (200 meters) in less then 15
seconds.
• To clear the vehicle's best 1/8 mile (200 meters) run, push and hold the OK button for
five seconds.
ELECTRONICS
137
To Next Page
Loading...
