Dodge 2016 Challenger - Maintenance Procedures

Component Fluid, Lubricant, or Genuine Part
Spark Plugs W e recommend you use MOPAR Spark Plugs.
Fuel Selection 91 Octane or higher, 0-15% Ethanol.
Chassis
Component Fluid, Lubricant, or Genuine Part
Manual Transmission – If
Equipped
W e recommend you use MOPAR ATF+4 Automatic Trans-
mission Fluid.
Automatic Transmission – If
Equipped
Use only MOP AR ZF 8&9 Speed ATF Automatic Transmis-
sion Fluid, or equivalent. Failure to use the correct fluid
may affect the function or performance of your transmis-
sion.
Hydraulic Power Steering
Reservoir – If Equipped
W e recommend you use MOPAR Hydraulic System Power
Steering Fluid or equivalent meeting the requirements of
FCA Material Standard MS-10838.
Brake Master Cylinder W e recommend you use MOPAR DOT 3, SAE J1703 should
be used. If DOT 3, SAE J1703 brake fluid is not available,
then DOT 4 is acceptable.
Rear Axle W e recommend you use MOPAR LSD Synthetic Gear Lubri-
cant SAE 75W85 (API GL-5).
MAINTENANCE PROCEDURES
For information on the maintenance procedures for your vehicle, please refer to “Main-
tenance Procedures” in “Maintaining Your Vehicle” in your Owner’s Manual or applicable
supplement on the DVD for further details.
MAINTAINING YOUR VEHICLE
200