Tether Strap Installation
1. Route the tether strap to provide the most direct path for the strap between the anchor
and the child seat.
2.
If your vehicle is equipped with adjustable rear head restraints, raise the head restraint,
and where possible, route the tether strap under the head restraint and between the two
posts. If not possible, lower the head restraint and pass the tether strap around the
outboard side of the head restraint.
3.
Attach the tether strap hook of the child restraint to the top tether anchorage and remove
slack in the tether strap according to the child restraint manufacturer’ s instructions.
Rear Seat Tether Strap Mounting (Second
Row Anchorage Shown)
Top Tether Strap Mounting (Third Row 60/40
Anchorage Shown)
GETTING STARTED
24
To Next Page
Loading...
