Using The Mode Select Knob And Hoses
Your Tire Service Kit is equipped with the following symbols to indicate the air or sealant
mode.
Selecting Air Mode
Push in the Mode Select Knob (5) and turn to this position for air
pump operation only. Use the Black Air Pump Hose (7) when
selecting this mode.
Selecting Sealant Mode
Push in the Mode Select Knob (5) and turn to this position to inject
the Tire Service Kit Sealant and to inflate the tire. Use the Sealant
Hose (clear hose) (6) when selecting this mode.
Using The Power Button
Push and release the Power Button (4) once to turn On the Tire
Service Kit. Push and release the Power Button (4) again to turn Off
the Tire Service Kit.
Using The Deflation Button
Push the Deflation Button (2) to reduce the air pressure in the tire if
it becomes over -inflated.
WHAT TO DO IN EMERGENCIES
91
To Next Page
Loading...
