Compass Calibration
This compass is self-calibrating, which eliminates the need to set the compass manually.
When the vehicle is new, the compass may appear erratic, and the EVIC will display “CAL”
until the compass is calibrated.
You may also calibrate the compass by completing one or more 360 degree turns (in an
area free from large metal or metallic objects) until the “CAL” message displayed in the
EVIC turns off. The compass will now function normally.
PROGRAMMABLE FEATURES
Electronic Vehicle Information Center (EVIC) — If Equipped
• The EVIC can be used to view or change the following settings. Push the UP or
DOWN
button until System Setup displays, then push the SELECT button.
Scroll through the settings using the UP or DOWN buttons. Push the SELECT
button
to change the setting. Push the BACK button to scroll back to a previous menu or sub
menu.
•
Fuel Economy
•
Average Fuel Economy
• Distance To Empty (DTE)
• Miles Per Gallon (MPG)
•
Trip Info
•
Trip A
• Trip B
• Elapsed Time
•
V ehicle Speed
•
Tire PSI
•
Messages
• Vehicle Info (Customer Information Fea-
tures)
Uconnect 4.3 Customer Programmable Features
• The Uconnect 4.3 system allows you to access Customer Programmable feature
settings such as Display, Clock, Safety/Assistance, Lights, Doors & Locks, Heated
Seats, Engine Off Operation, Compass Settings, Audio, Phone/ Bluetooth and SIRIUS
Setup through buttons on the faceplate and buttons on the touchscreen.
• Press the “Settings” button on the right side of the unit to access the Settings screen,
use the “Page Up/Down” buttons on the touchscreen to scroll through the following
settings. The following feature settings are available:
• Display • Auto On Comfort & Remote Start
• Clock • Engine Off Options
• Safety/Assistance • Audio
• Lights • Phone/Bluetooth
• Doors & Locks • SIRIUS Setup
ELECTRONICS
79
To Next Page
Loading...
