CAUTION!
Failure to follow these procedures could result in
damage to the charging system of the booster vehicle
or the discharged vehicle.
6. Connect the positive (+) end of the jumper cable to the
remote positive (+) post of the discharged vehicle.
7. Connect the opposite end of the positive (+) jumper
cable to the positive (+) post of the booster battery.
8. Connect the negative (-) end of the jumper cable to the
negative (-) post of the booster battery.
9. Connect the opposite end of the negative (-) jumper
cable to the remote negative (-) post of the vehicle with
the discharged battery.
WARNING!
Do not connect the jumper cable to the negative (-)
post of the discharged battery. The resulting electri-
cal spark could cause the battery to explode and
could result in personal injury. Only use the specific
ground point, do not use any other exposed metal
parts.
10. Start the engine in the vehicle that has the booster
battery, let the engine idle a few minutes, and then
start the engine in the vehicle with the discharged
battery.
326 WHAT TO DO IN EMERGENCIES
To Next Page
Loading...
