Dodge Avenger 2010 - Page 3

AVENGER
C | 5
AVENGER
2010 DODGE AVENGER SPECIFICATIONS
Dimensions are in inches (millimeters) at curb weight with standard wheels and tires unless otherwise noted.
GENERAL INFORMATION
Body Style Four-door sedan
Assembly Plant Sterling Heights Assembly, Mich.
EPA Vehicle Class Mid-size
ENGINE: 2.4-LITER GASOLINE DOHC 16-VALVE DUAL VVT SMPI I-4
A
vailability Standard on Avenger SXT and R/T
Type and Description Four cylinders in-line, tuned intake manifold with Electronic Active Charge
Motion Control valves dual counter-rotating balance shafts
Displacement 144 cu. in. (2360 cu cm)
Bore x Stroke 3.46 x 3.82 (88 x 97)
Valve System Chain-driven DOHC, 16 valves, electronically controlled dual Variable-valve
Timing (VVT), direct-acting shimless mechanical bucket tappets
Fuel Injection Sequential, multi-port, electronic, returnless
Construction High-pressure die-cast aluminum block with dry iron liners, cast-aluminum
cylinder heads, cast-aluminum ladder frame, forged steel crankshaft
Compression Ratio 10.5:1
Power (SAE net, estimated) 173 bhp (129 kW) @ 6,000 rpm (71 bhp/liter)
Torque (SAE net, estimated) 166 lb.-ft. (225 N•m) @ 4,400 rpm
Max. Engine Speed 6,500 rpm (electronically limited)
Fuel Requirement Unleaded regular, 87 octane (R+M)/2
Oil Capacity 5.0 qt. (4.7L) SAE 5W-20
Coolant Capacity 7.2 qt. (6.8L)
Emission Controls Single catalytic converter, dual heated oxygen sensors and engine features
(a)
0.9 g/mile (0.56 g/km)
Estimated 2008 EPA Fuel Economy (City/Hwy) 21/30
(a)
Meets Federal Tier 2, Bin 5 emissions requirements and PZEV requirements in California, Massachusetts, New York, Maine,
Vermont, Connecticut, Pennsylvania, Rhode Island, New Jersey, Oregon and Washington. Meets Euro IV emissions requirements.
ENGINE: 3.5-LITER GASOLINE SOHC 24-VALVE SMPI V-6
Availability Optional on Avenger R/T
Type and Description 60-degree bank angle, liquid-cooled, three-plenum intake manifold
with electronically controlled manifold tuning valve and short-runner valves
Displacement 3,518 cu cm
Bore x Stroke 96 x 81
Valve System SOHC, 24 valves, hydraulic, center-pivot roller rocker arms
Fuel Injection Sequential, multi-port, electronic
Construction Semi-permanent mold aluminum block with cast-in iron liners
and cast-aluminum cylinder heads
Compression Ratio 10.0:1
Power (SAE net, estimated) 235 bhp (175 kW) @ 6,400 rpm (71.4 bhp/liter)
Torque (SAE net, estimated) 232 lb.-ft. (315 N•m) @ 4,000 rpm
Max. Engine Speed 6,800 rpm (electronically limited)
Fuel Requirement Unleaded mid-grade, 89 octane (R+M)/2 – preferred
Unleaded regular, 87 octane (R+M)/2 – acceptable
Oil Capacity 5.7L with dry filter SAE 5W-20
Coolant Capacity 9.75L