Dodge Avenger 2011 - Page 2

2 / DODGE AVENGER SPECIFICATIONS http://media.chrysler.com
SPECIFICATIONS
AVENGER
ENGINE: 3.6-LITER GASOLINE DOHC 24-VALVE SMPI V-6
Availability
Optional on Avenger Express, Mainstreet and Lux models, Standard on Heat and
R/T
Type and Description
60-degree bank angle, liquid-cooled, three-plenum intake manifold with
electronically-controlled manifold tuning valve and short-runner valves
Displacement
3,605 cu. cm.
Bore x Stroke
3.78 x 3.28 (96 x 83 mm)
Valve System
DOHC, 24 valves, hydraulic, roller finger followers
Fuel Injection
Sequential, multi-port, electronic
Construction
High-pressure die-cast A380 aluminum block with iron liners and semi -
permanent mold A319 aluminum heads
Compression Ratio
10.2:1
Power (SAE net, estimated)
283 bhp (211 kW) @ 6,400 rpm
Torque (SAE net, estimated)
260 lb.-ft. (353 Nm) @ 4,400 rpm
Max. Engine Speed
6,800 rpm (electronically limited)
Fuel Requirement
Unleaded regular, 87 octane (R+M)/2 – acceptable
Oil Capacity
6 qts (5.7L) with dry filter SAE 5W-30
Coolant Capacity
10.3 pts (9.75L)
Emission Controls
Dual catalytic converter, four heated oxygen sensors, electronic EGR, and
internal engine features
(d)
Estimated EPA Fuel Economy (City/Hwy)
19 City/29 Highway
(d) Meets Federal Tier 2, Bin 5 emission requirements and ULEV II requirements in California, Massachusetts, New York,
Maine, Vermont, Connecticut, Pennsylvania, Rhode Island, New Jersey, Oregon and Washington. Meets Euro IV
emissions requirements.
TRANSAXLE: 40TES AUTOMATIC FOUR-SPEED OVERDRIVE
Availability
Standard with Avenger Express model
Description
Four-speed overdrive, adaptive electronic control, electronically-modulated
converter clutch
Gear Ratios
1
st
2.842
2
nd
1.57
3
rd
1.00
4
th
0.69
Reverse
2.21
Final Drive Ratio
3.91 with 2.4L engine
Overall Top Gear
2.69 with 2.4L engine