BRAKE/TRANSMISSION
INTERLOCK SYSTEM
• The manual override may be used in
the event that the shift lever should
fail to move from PARK with the Key
Fob in the ON position and the brake
pedal pressed.
• To operate the shift lock manual
override, perform the following steps:
• Locate and remove the removable
plug in the right side of the shift
lever housing.
• Turn the ignition switch to the ACC
or ON position without starting the
engine.
• Firmly set the parking brake.
• Press and maintain firm pressure
on the brake pedal.
• Using your finger, press and hold
the override tab through the
access port.
• Move the shift lever into the
NEUTRAL position and start the
vehicle.
• Reinstall the removable plug.
• Have your vehicle inspected by your
local authorized dealer if the shift
lock manual override has been used.
UTILITY
40
To Next Page
Loading...
