FLUIDS, LUBRICANTS, AND GENUINE PARTS — DODGE
Engine — 3.6L
Component Fluid, Lubricant, or Genuine Part
Engine Coolant W e recommend you use MOPAR Antifreeze/Coolant 10 Y ear/
150,000 Mile Formula OAT (Organic Additive Technology).
Engine Oil W e recommend you use API Certified SAE 5W-20 Engine Oil,
meeting the requirements of FCA Material Standard MS-
6395 such as MOPAR, Pennzoil, and Shell Helix. Refer to your
engine oil filler cap for correct SAE grade.
Engine Oil Filter W e recommend you use MOPAR Engine Oil Filters.
Spark Plugs W e recommend you use MOPAR Spark Plugs.
Fuel Selection 87 Octane, 0-15% Ethanol.
Chassis — 3.6L
Component Fluid, Lubricant, or Genuine Part
8-Speed Automatic
Transmission
Use only MOP AR ZF 8&9 Speed ATF Automatic Transmission
Fluid, or equivalent. Failure to use the correct fluid may affect
the function or performance of your transmission.
Brake Master Cylinder We recommend you use MOPAR DOT 3, SAE J1703. If DOT
3 brake fluid is not available, then DOT 4 is acceptable.
Rear Axle W e recommend you use MOP AR OD Synthetic Gear Lubricant
SAE 75W85 (API GL-5).
Engine — 5.7L
Component Fluid, Lubricant, or Genuine Part
Engine Coolant W e recommend you use MOPAR Antifreeze/Coolant 10 Y ear/
150,000 Mile Formula OAT (Organic Additive Technology).
Engine Oil W e recommend you use API Certified SAE 5W-20 Engine Oil,
meeting the requirements of FCA Material Standard MS-
6395 such as MOPAR, Pennzoil, and Shell Helix. Refer to your
engine oil filler cap for correct SAE grade.
Engine Oil Filter W e recommend you use MOPAR Engine Oil Filters.
Spark Plugs W e recommend you use MOPAR Spark Plugs.
Fuel Selection – With
Automatic Transmission
89 Octane recommended – 87 Octane acceptable,
0-15% Ethanol.
Fuel Selection – With
Manual Transmission
91 Octane or higher, 0-15% Ethanol.
MAINTAINING YOUR VEHICLE
214
To Next Page
Loading...
