Dodge Challenger 2019 - Page 6

5. Select “Add device.”
•
Uconnect Phone will display an “In progress”
screen while the system is connecting.
Uconnect 4C & 4C NAV With 8.4-inch Display
1. Place the ignition in the ACC or ON position.
2. Press the “Phone” button in the Menu Bar on
the touchscreen.
3. Select “Pairing.”
4. Select “Paired Phones And Audio Devices.”
5. Select “Add Device.”
•
Uconnect Phone will display an “In progress”
screen while the system is connecting.
Pair Your iPhone:
To search for available devices on your Bluetooth
enabled iPhone:
1. Press the Settings button.
2. Select Bluetooth.
• Ensure the Bluetooth feature is enabled.
Once enabled, the mobile phone will begin
to search for Bluetooth connections.
3. When your mobile phone finds the Uconnect
system, select “Uconnect”.
Complete The iPhone Pairing Procedure:
1. When prompted on the mobile phone, accept
the connection request from Uconnect Phone.
NOTE:
Some mobile phones will require you to enter the
PIN number.
Uconnect 4C & 4C NAV With 8.4-Inch Dis-
play
Bluetooth On/Uconnect Device
Pairing Request